SP-Elektroniikka ... Pienen puuhastelijan asialla jo vuodesta 1984

NitorLACK nitrocellulose paint shell pink - 500ml can

Etusivu > Nitorlack (tulossa)

NitorLACK nitrocellulose paint shell pink - 500ml can
NitorLACK nitrocellulose paint shell pink - 500ml can
NitorLACK nitrocellulose paint shell pink - 500ml can
NitorLACK nitrocellulose paint shell pink - 500ml can
Tuotekoodi
N260724108
EAN
9900000353971
Toimituskulut alk.
26,00 €
20,72 € ALV 0,00 %
kpl
Shel Pink (DUCO 2371) was a remarkable and rare custom colour that was inspired by the 1956 Desoto cars. It was used from '60-'63 by Fender. It�s probably the weirdest custom colour for Fender and was later replaced by Candy Apple Red. Still, it goes well with white pickguard and maple fretboards on both Stratocasters and Telecasters.

Colours for vintage-inspired guitars
After great work and exhaustive study by our laboratory and technical department, we have created colours for guitars to faithfully recreate the tones of vintage Fender and Gibson guitars to paint electric guitars. They have been based on original samples from the �50s and �60s. However, keep in mind that vintage guitar colours may have changed a lot over the years due to the aging of nitrocellulose lacquer and changes in the brands� own colours. Therefore two guitars finished in 1960 with Fender card colours can look different between them or with respect to a more current guitar today.

Nitrocellulose paint in 500ml can
If you�d like to paint your guitar a perfect finish and you have painting equipment (spray gun and compressor) available, the best choice is nitrocellulose varnish in a can. You�ll get a higher performance by a lower price and with painting equipment the final result will be professional with less effort. It is recommended to dilute the product with our solvent to adjust the viscosity. For the application to be perfect we have two types of solvents: the usual solvent used is Solvent Medium (art. nr. 48138 / N540423104), but for ambient conditions of humidity and temperature more extreme we can use Solvent Retard (art. nr. 48139 / N540425104) to avoid bubbling and blooming in the finish.

The optimal application conditions are between a temperature of 15 to 25 �C and 50 to 70% humidity. The percentage of dilution will depend on the painting equipment and its configuration but it�s recommended to use 10 to 20% solvent. The most common gun peak is 1.3 to 1.5 and the compressor pressure is about 2.5 to 3 bars.

tech

Sinua on kiinnostanut

SMA -naaras N uros adapteri
103577
Tuote 103577. SMA -naaras N uros adapteri. N uros SMA naaras adapteri. 
8,00 €
Saatavilla 0 kpl
tech
SP-Elektroniikka
Merikoskenkatu 12
FI-90500, Oulu
Oulu
FINLAND
puh. +358-8-5565 858
tilaukset(at)spelektroniikka.fi
Y-tunnus: 2099893-9
Alustana Clover Shop® - suomalainen verkkokauppaohjelmisto