Fly reel TFH® FRP56 - small fly reel with brake, ice reel

Main Page > Special offers etc ...

Fly reel TFH® FRP56 - small fly reel with brake, ice reel
Fly reel TFH® FRP56 - small fly reel with brake, ice reel
Fly reel TFH® FRP56 - small fly reel with brake, ice reel
Fly reel TFH® FRP56 - small fly reel with brake, ice reel
Fly reel TFH® FRP56 - small fly reel with brake, ice reel
Fly reel TFH® FRP56 - small fly reel with brake, ice reel
Product code
103998
Delivery costs from
12,00 €
9,68 € VAT 0,00 %
orig. price
16,40 €
pcs

Product 103998. Fly reel TFH® FRP56 - small fly reel with brake, ice reel, class 5/6. The reel is lightweight, quite a point to handle, no ripple, made of "genuine" plastic / graphite blend. Balanced foot, not in the middle of the polish. The disc brake (cork mix), with cap and mixes, has the property of swelling in water and for the rest of the evening the brake is tight even if you don't want to. (NOTE! Cork has also been used as a brake material in very high quality coils). Now available Teflon Brake Disc, replace yourself and you will get a reel equal to many times more expensive reels at a really low price. The Teflon bellows were tuned for fishing in the summer of 2014 and there were no problems with the brake, although the reel was sometimes intentionally floated in the water, Item 111397. Of course, good drying must be done if the reel has been under water, applies to all reels.

!!! Neulalaakerointi. Weight approx. 120g. The maximum outer diameter of the polish is approx. 79 mm. Polish inner diameter approx. 25 mm. Polish depth approx. 15 mm. Really nice balanced and light system in our 5 # Red Whip fiberglass whip.

 

This coil can hold e.g.

WF5F (100FT) + bottom line a few tens of meters, depending on what you use as bottom line.

WF6F (100FT) + some bottom line, again depending on what kind of bottom line you use.

 

Hand change, factory setting left hand rewind:

1. Loosen the spool mounting nut.

2. Lift the spool out.

3. Loosen the bearing cover nut.

4. Remove the plastic bearing sleeve (note the holes up)

5. Lift out the needle bearing and turn it over. Check that the bearing did not become "needles" on the inner ring if the fire should be carefully inserted.

6. Replace the adapter sleeve, paying attention to the direction.

7. Tighten the bearing guard nut (not too tight).

8. Carefully replace the spool without using excessive force.

9. Tighten the spool locknut (not too tight).

Toimii myytäessä takuu. Vaikkakin ... olemme itse käyttäneet näitä perhostelussa ja pilkinnässä vuosia ilman mitään ongelmia.

tech

See also

Teflon jarrulevy FRP -perhokeloihimme 3kpl pussukka
Tuote 111397. Teflon jarrulevy FRP -perhokeloihimme 3kpl pussukka. Paksuudet 0.5, 1.0, 1.5 mm. Voit helposti kokeilla millä levyllä saat mieleisesi tuntuman jarrun säätöön. Jarrulevyn... 
5,50 €
tech
SP-Elektroniikka Oy
Merikoskenkatu 12
FI-90500, Oulu
Oulu
FINLAND
tel. +358-8-5565 858
tilaukset(at)spelektroniikka.fi
Business ID: 1007918-9